8 PORT 10/100 DESKTOP SWITCHPart number: NW223NXT**
Our 8 Port 10/100 Fast Ethernet Switches are equipped with a Built-In Auto-Negotiation function. Simply attach a network device to any port and it will automatically set to operate at the fastest possible speed. These Switches are designed to provide lots of bandwidth with minimum hassle. They are 100% Plug & Play and require no configuration. These models fully comply with IEEE 802.3u and IEEE 802.3 standards for Fast Ethernet and Ethernet operations.
Specification:
-
8 ports 10/100Mbps TX Auto-Negotiation
-
Full/Half-Duplex on every TX port
-
Supports TP interface Auto MDIX function for auto TX/RX swap
-
Automatic Source MAC Address
-
Supports Store & Forward architecture and performs forwarding and filtering
-
Broadcast Storming Filter function
-
IEEE802.3x flow control for Full-duplex
-
Back Pressure function for Half-duplex operation
-
Runt and CRC Filtering eliminates erroneous packets to optimize the network bandwidth
- Support to handle up to 1522 bytes packet
- Temp Range: 0° - 55° C
NW223NXT06 /110V & NW223NXT07 /220V
16 PORT 10/100 DESKTOP/RACKMOUNT SWITCHPart number: NW223NXT**
Our 16 Port 10/100 Fast Ethernet Switch is a multi-purpose Switch capable of bridging 10 and 100 Mbps segments and greatly expanding available bandwidth. Expanding bandwidth is achieved by each of the Sixteen (16) ports creating and independent 10 Mbps or 100 Mbps network segment. In addition, each port is equipped with a built-in Auto-Negotiation function capable of automatically setting itself to operate at the fastest possible speed-ranging from 10 Mbps to 200 Mbps.
Specification:
- Supports QoS function on each port, based on 802.1p/802.1q VLAN Tag priority and TCP/IP Header's TOS/DS.
- Four (4) Trunk groups supported.
- Auto MDI/MDIX function supported.
- Independent bandwidth for each port.
- 10/100 Mbps TP ports with Auto-Negotiation supported.
- Bridging capability for 10 Mbps and 100 Mbps segments.
- Provides Store-and-Forward forwarding scheme.
- IEEE 802.3x Flow-Control supported for Full-Duplex operation.
- Back-Pressure Flow-Control supported for Half-Duplex operation.
- Desktop size with rack mounting capability.
- Broadcast Storm control supported.
- Support Port-Based Home VLAN - Allow home networks to share a common server or router.
NW223NXT29 / 110V
NW223NXT30 / 220V
24 PORT 10/100 RACKMOUNT SWITCH Part number: NW223NXT**
Our 24 Port 10/100 Mbps Fast Ethernet Switch is a multi-speed, versatile network device combining both standard and “Big-Pipe” ports under the same hood. This model feature Plug-&-Play installation with no network configuration necessary.
Specification:
- Twenty-four (24) Port 100 BASE-TX Fast Ethernet Switch.
- Supports QoS function based on IEEE 802.1p/1302.1q port priority, VLAN tag priority and TCP/IP header’s TOS/DS.
- Supports VLAN, up to 24 group VLANs.
- Features console port and software for easy configuration.
- Store-and-Forward technology filtering/forwarding is used to eliminate bad packets.
- Back-Pressure Flow-Control support for Half-Duplex operations.
- IEEE8O2.3x Flow-Control support for Full-Duplex operations.
- All connectors and LEDs are visible from the front panel for easy access and real time viewing of Switch status.
- All TP ports support Auto-MDI/MDIX, and Auto-Negotiation function.
NW223NXT54 / 110V
NW223NXT55 / 220V
16 PORT 10/100 NWAY SWITCHPart number: NW223NXT**
The 16 port Ethernet Switch are designed to allow simultaneous transmission of multiple packets via an internal high-speed data channel. This means that it can partition a network more efficiently than bridges or routers in most environments .This 16 port Ethernet Switch is a highly reliable network Switch and is the ideal device for bridging Ethernet to Fast Ethernet workgroups or networks.
Specification:
- Complies with the IEEE802.3 10Base-T
- Ethernet and IEEE802.3u 100Base-TX Fast Ethernet standard
- 16 ports 10/100Mbps TX Auto-Negotiation Ethernet Switch
- Full/Half-Duplex capability on every TX port
- Supports TP interface Auto MDIX function for auto TX/RX swap
- Automatic Source MAC Address Learning and Aging
- Supports Store & Forward architecture and performs forwarding and filtering
- Broadcast Storming Filter function
- IEEE802.3x flow control for Full-duplex operation
- Back Pressure function for Half-duplex operation
- Runt and CRC Filtering eliminates erroneous packets to optimize the network bandwidth
- Support to handle up to 1522 bytes packet
- LED indicators for simple diagnostics and management
- Plug and Play
NW223NXT31 / 110V
NW223NXT32 / 220V