Configuration steps

• How to pair your outdoor wired Wi-Fi Smart camera to the Nexxt Home app.
• Open the App.
• On the "All devices" screen, tap "Add device" or click the "Plus" symbol on the top right corner.
• On the next screen, scroll down and tap the "Smart camera" icon.
• Follow the instructions on the "Reset the device" screen.
• Turn on the camera and wait for the light status indicator to start blinking or until you hear a prompt tone, indicating the camera is in pairing mode.
• Click the "Next step" check mark to confirm and tap "Next" below.
• Select your 2,4 GHz Wi-Fi network, confirm the password and tap "Next".
• Scan the onscreen QR code with the camera, no more than 15 to 20 cm away from the lens.
• A tone will prompt.
• Confirm by tapping "I heard a prompt" below.
• Wait a few seconds for the application to pair with the camera.
• Once the device has been successfully added, you can click the pencil icon to the right to assign a name and a specific room for your new camera.
• Click "Done" to save the changes and then tap "Done" again to enter the camera's main interface and start setting it up.
• With this, you have learned how pair your Smart Wi-Fi outdoor camera to the Nexxt Home app.